Which Ashcroft do I want

[Woodman]

OK , I'm fed up with the pieces of **** that pass for thermos on my Klose pit. Which Ashcrofts do I want for my pit? I'll need three. Do I go with a onger stem? The space where they go in is basically useless any way. What say yee?

[Mac]

Woodie,

Look at the last row. You get from 50-550 coverage. Very versatile. If you can fit the longer stem I would GO THAT ROUTE as it will get you deeper into the pit for a more accurate reading.

http://www.ashcroft-gauges.com/pdf/EL.pdf

[Ed Embry]

I agree with Mac. The best prices I've found are here. (http://flw.com/olash7.htm#1082) You set the options when you order.

[Zeeman]

I got the 50-550 with 4 inch stem, $56.00. I like the longer stem, goes within 1/2 inch of top tray. Great read on top tray.
Just remember not to put a butt under it :lol: :lol:
z

[Oli]

I think you could get away with two or three different sizes. I dont remember if your pit was a 24'"or a 30 " but I would think the middle and bottom guage at about a 12 " stem and the top some where about 9".that should get them in the center of the pit,... your Klose has them in the middle correct? ( I got to flip back over to the pix.)


I got mine from Grainger 55 bucks 50'-500' 6 inch stem

[txpgapro]

What brand you got on there now Woodman? What about these EADS I've heard about? Tru-Tel or Tru-Temp?

[1044]

I will some day buy long stems for mine, but I can only use them on the middle and bottom rack. For some brilliant :roll: reason, the top one is in at an angle, so any longer than the one I have would hit the rack. :evil:

[Woodman]

I think you could get away with two or three different sizes. I dont remember if your pit was a 24'"or a 30 " but I would think the middle and bottom guage at about a 12 " stem and the top some where about 9".that should get them in the center of the pit,... your Klose has them in the middle correct? ( I got to flip back over to the pix.)


I got mine from Grainger 55 bucks 50'-500' 6 inch stem

It's a 24" but the top one is angled like 1044's. I need one on the upright too.

[Mic]

Woodman, I got mine from Graingers. Here's a link. They seem to be pretty reasonable if you have a branch near you. :?

Grainger's (http://www.grainger.com/Grainger/searchresults.jsp?mfgindx2=Temperature+Gauges&mfgindx1=Ashcroft&search_type=mfgindx)

Mic

[Dirty Ron]

Woody, I prefer the 50-400 like I'm running...

Rarely you will get that hot and the numbers are easier to read

[Woodman]

Thanks Ron.